Rocker Pods Extensions
Back to Home Page
>
Rocker Pods Extensions
>
>
>

01 Time to install the optional Rocker Pod Extensions
02 Use the supplied transfer punch template to mark the mounting hole locations
03 What wait this is a tranfer OH TRANSFER
04 Marking the four corner mounting locations
05 Mark the same hole locations on the extensions
06 Once all the holes have been drilled you are ready to mount the Rocker Pod Extensions using the stainless screws and rubber gasket provided
07 Rubber gasket
08 Great job Mic looks like it all lines up
09 Don't forget to use Antisieze Compound on those screws
10 Aligne the Extensions and tighten the four bolts (Do Not Over Tighten)
11 First extension is done
12 Since our Dodge is a Dually we opted to go with the Rocker Pod Fender Extension aswell
13 The fender extension mounts the same as the regular Rocker Pod Extension
14 The final piece to go on is the end cap accesory plate
15 Accesory plate
16 All done
17 Figures it's snowing AGAIN!

Back to Home Page
>
Rocker Pods Extensions
>
>
>